Epson GQ-3500 User Manual page 106

The value of n2 and n3 specifies the horizontal distance (in units of the
minimum increment) from the logical origin (Y-axis) to the line's
starting point, using the formula: n2 + (n3 x 256). The value of n4 and n5
specifies the vertical distance (in units of the minimum increment) from
the logical origin (X-axis) to the line's starting point, using the
formula: n4 + (n5 x 256).
The following values canbe used for n6, which specifies the line
direction:
0: Horizontal line
1: Vertical line.
The value of n7 and n8 specifies the line thickness (in units of the
minimum increment), using the formula: n7 + (n8 x 256). The value of n9
and n10 specifies the line length (in units of the minimum increment),
using the formula: n9 + (n10 x 256). The minimum increment is specified
with ESC q.
ESC (
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Defines a form that can be printed
following values can be used for nl:
0: Delete a defined form
1: Start form definition
2: End form definition
The value of n2 must be from 1 to 8; it specifies the number of the form
being defined or deleted. If nl = 2 (to end a form definition) then
be eliminated. The full command format for form definition is as
follows:
Here, dl to dm are the data (including ESC sequences) making up the
form. Form definition will not work if any of the following codes are
included in the definition data: FF, ESC @, DC3, ESC ., ESC 1, or other
form definition commands.
A-30
ESC
123
27
7B
each page or deletes a form. The
on
Define/Delete Form
nl n2
nl n2
n2
nl
Page Printer Commands
d l . . .
d l . . .
d l . . .
can
n2
-