Installing The New Photoconductor Unit - Epson ColorPage 8000 Printer Manual

Caution
Be careful not to scratch
or touch the surface of
the drum. Oils from your
skin can damage it and
affect print quality.
When replacing the
photoconductor unit,
avoid exposing it to room
light any longer than
necessary.
Maintaining and Transporting the Printer

Installing the New Photoconductor Unit

Once you have removed the empty photoconductor unit, you're ready to
install the new one. Follow these steps:
1. Take a new photoconductor unit out of its package. Hold the handle
and remove the protective sheet as shown below:
2. Position the unit over the guide rails inside the printer. Then carefully
slide it all the way in.
4-13
| 4-13