16
| Unpacking and Setup Guide
I
NSTALLING THE
The photoconductor unit is highly sensitive and requires careful handling to provide
the best print quality. Follow these guidelines when you install the photoconductor
unit:
Avoid exposing the unit to room light any longer than necessary.
Be careful not to scratch the surface of the drum.
Avoid touching the drum, since oils from your skin can permanently damage its
surface and will affect print quality.
Follow these steps to install the photoconductor unit:
1 Open the front cover of
the printer.
2 Turn the large lever counterclockwise
90 degrees.
P
HOTOCONDUCTOR
U
NIT
lever