Setting I239X Emulation Options - Epson ColorPage 8000 Printer Manual

3-16 | Configuring the Printer
Note
If you change the
Orientation, Page Size,
or T. Margin settings,
the Text setting returns
to the default.
Most software
applications handle the
Auto CR function
automatically.
ESCP2 and FX menu settings (continued)
Setting Options
Auto LF Off, On
Bit Image Dark, Light, BarCode
ZeroChar 0, Slashed zero

Setting I239X Emulation Options

This emulation allows you to use your printer with IBM 2390/2391 Plus
commands.
I239X menu settings
Setting Options
Font Courier, Prestige, Gothic,
Orator, Script, Presentor,
Sans serif
Pitch 10, 12, 15, 17, 20, 24,
Prop. (all fixed pitches are
in cpi)
Code Page 437, 850, 860, 863, 865
T. Margin 0.30 to 1.50 inch in 0.05
inch steps; default is 0.5
Text From 1 to 111 lines;
default is 62
Auto CR Off, On
3-16
Description
Selects whether the printer
automatically adds a line-feed after
every carriage return. Set to On if
text lines overprint each other.
Sets the density for printing
bit-mapped images. The BarCode
setting converts bit-mapped images
to barcodes.
Selects the character to print for the
number zero.
Description
Selects the font for printing.
Sets the horizontal spacing for the
selected font.
Sets the number of the character
table.
Sets the distance from the top of
the page to the baseline of the first
line.
Sets the page length by the
number of lines.
Selects whether the printer
automatically performs a
carriage-return then line-feed
operation when the print position
exceeds the right margin.