Epson ColorPage 8000 Printer Manual page 43

2-12 | Monitoring the Printer
Warning messages (continued)
Message Explanation
Paper Set The paper in the specified paper
<paper source>
source doesn't match the paper
<paper size> size setting. (Hardware and
software settings don't match.)
Print Overrun
The required time to process the
print data exceeds the print
engine speed because the
current page is too complex.
<CMYK> Toner The specified toner cartridge is
Low almost empty.
Warning The photoconductor unit is
Photocondctr nearing the end of its life.
Waste T Box
The waste toner collector is
Nearfull almost full.
Response
Make sure the paper is the size you want,
then press the Continue button to print.
You can disable size checking through the
printer's control panel.
Press the Continue button to print. If this
message appears again, turn on Page
Protect in the SelecType Config Menu.
If you see the same message when you
try printing the same page again, you may
need to reduce the number or size of
graphics or fonts, lower the resolution, or
add memory to your printer.
Press the Continue button to print.
Replace the toner cartridge as soon as
possible.
Press the Continue button to print.
Replace the photoconductor unit as soon
as possible.
Press the Continue button to print.
Replace the waste toner collector as
soon as possible.
2-12
See
page 3-8
page 3-8
page A-2
page 4-2
page 4-10
page 4-15