Saving Power In Standby Modes; Resetting The Printer - Epson ColorPage 8000 Printer Manual

Saving Power in Standby Modes

The printer has two power-saving modes, Standby Level 1 and Standby
Level 2. In both modes, the printer saves power by lowering the fuser
temperature.
The printer enters Standby Level 1 when it is idle for 30 minutes. It takes
approximately one minute to warm up when you send a print job. The
printer enters Standby Level 2 when it is idle for 60 minutes. It takes
approximately five minutes to warm up when you send a print job.
You can disable the power-saving modes if necessary. See page 3-9 for
instructions.

Resetting the Printer

If you decide to cancel a print job after the printer has started processing it,
you can reset the printer. You may also need to reset after certain errors
occur (see the list on page 2-7). Resetting stops the printer and clears the
current print job.
To reset the printer, hold down the
•
appears on the display.
To clear all jobs from the printer's memory and cancel all printer
•
settings, hold down the
on the display. This has the same effect as turning off the printer and
then turning it back on.
On Line
2-3
Monitoring the Printer
and
Alt
and buttons until
Alt Reset
Form Feed Continue
Reset Alt
Alt
Reset
button
button
buttons until
Reset Reset
appears
Reset All
Paper Source Page Size Manual Feed Orientation
RITech Copies MP Tray Size Out Bin
Menu Item Value Enter
| 2-3
^