Setting Print Options With Selectype - Epson ColorPage 8000 Printer Manual

3-10 | Configuring the Printer
Parallel menu settings
Setting Options
Speed Fast, Normal
Bi-D Nibble, ECP,
Off
Buffer Size Normal,
Maximum,
Minimum

Setting Print Options With SelecType

You can use two of the SelecType menus, Printing and Tray Size, to set
default print options. Normally you set these options through the printer
properties, print, or page setup dialog box in your software. However, you
can also use the One-Touch mode, described on page 3-2, and the
SelectType menus, as described below.
Follow these steps to set print options through SelecType:
1. Press the menu button until the display shows
Size Menu.
2. Press the button. The display shows
Item
(Printing Menu) or
3. Press the button to change the setting, or press the
Value
to access the next setting. See the tables below for information about the
settings and options.
With the Tray Size menu, you can change the size for the multipurpose
tray, but not for the cassette(s). The tray size setting for the cassettes is
always based on the position of the edge guides in the cassettes
themselves. You can use the menu only to check the setting.
3-10
Description
Sets the transfer speed between the RIP (or
print server) and the printer. If you
experience problems with the fast speed,
set it to Normal.
Configures or disables bidirectional
communication between the printer and the
RIP.
Determines the amount of memory to be
used for receiving and printing data from the
RIP. Maximum allocates more memory to
receiving data. Minimum allocates more
memory to printing.
(Tray Size Menu).
MP Tray Size = MP
or
Printing Menu
Paper Source = Auto
button
Item
Tray