Setting And Configuring Printer Emulations - Epson ColorPage 8000 Printer Manual

3-12 | Configuring the Printer
Tray Size menu settings
Setting Options
MP Tray Size A4, A3, A5, B4,
B5, LT, B, HLT,
LGL, GLT, GLG,
EXE, F4, MON,
C10, DL, C6,
IB5, CTM, A3W
LC1 Size LC 2, 3, and 4
items only
LC2 Size
appear if you
have the large
LC3 Size
capacity unit.
LC4 Size

Setting and Configuring Printer Emulations

The Emulation menu lets you select any of five alternate emulations for your
printer (in addition to PostScript and the native ESC/Page Color language):
®
• : HP LaserJet 4 (PCL5e)
LJ4
• : EPSON 24-pin dot-matrix printer
ESCP2
™
• : EPSON 9-pin dot-matrix printer
FX
®
• : IBM Proprinter
I239X
®
• : GL/2 plotter
GL2
The default setting lets the printer switch to the correct emulation
Auto
automatically based on incoming data.
You can use the Test menu to print font samples for the various emulations,
in addition to printing the two test pages described in Chapter 2. Five
additional menus are available so you can set printing options for the five
alternate emulations.
The following tables show the options available for each emulation. The
default option is shown in boldface.
3-12
Description
Sets the size for paper in the
multipurpose tray. See page B-2 for
page size dimensions.
The tray size setting for the cassettes is
always based on the position of the
edge guides in the cassettes
themselves. You can use the menu
only to check the setting.
®