Ozone Safety - Epson ColorPage 8000 Printer Manual

Your printer is a Class 1 laser product as defined in IEC 825 specifications.
The label shown below is attached in countries where required.

Ozone Safety

Ozone gas is generated by laser printers as a byproduct of the printing
process; it is produced only during printing. The print engine shall not
exceed 0.02 ppm ozone concentration TWA (Time-Weighted Average).
To minimize the risk of exposure to ozone, you should avoid the following
conditions:
Use of multiple laser printers in a confined area (see above)
•
Operation in conditions of extremely low humidity
•
Poor room ventilation
•
Long, continuous printing together with any of the above
•
The printer should be located so that the exhaust gases and heat generated
are not blown directly into the user's face and are vented directly out of the
building whenever possible.
7
Introduction | 7