Pentair BIOSHIELD CLP41A6-XN Installation And User Manual page 28

26
BIOSHIELD™ Commercial UV Disinfection System Installation and User's Guide
SETUP Menu Text Display Options
RESET Master Counter
Resets the "Master" hour counter. Press the "Right" key to select "Yes", then press
the "Enter" key to complete the command. To exit without making an adjustment
select "Left", this will return you to the SETUP Menu Text Display.
RESET Single Counter
Resets individual lamp hours. Use the "Right" key to select the desired lamp
to reset. Press "Enter" to complete the command. To exit without making an
adjustment select "Left", this will return you to the SETUP Menu Text Display.
RESET All Lamp Counters
Resets all lamp hour counters by pressing the "Right" key and selecting YES.
Press the "Enter" key to complete the command. To exit without making an
adjustment select "Left", this will return you to the SETUP Menu Text Display.
SCALE UV% (optional)
Resets the UV Intensity Scale. The actual scale is shown on the screen in the
numeric display window. Adjust the UV sensor probe (located on the UV vessel)
to the desired distance for a 100% reading. When the distance is set, press the
"Enter" key and the UV Intensity reading will be scaled to read 100%. To exit
without making an adjustment select "Left", this will return you to the SETUP
Menu Text Display.
ALARM UV% LOW (optional)
With the UV Intensity (UV 100%) scaling complete, a "Low Alarm" set-point may
be set Use the "Right" key, "Big Left" keys and "Big Right" keys to select desired
"Low Alarm" set-point, then press "Enter" to complete the command. To exit
without making an adjustment select "Left", this will return you to the SETUP
Menu Text Display.