Scanning From A Program; Placing Film Or Slides On The Scanner; Scanning With The Scan Button; Removing The Film Holder And Document Mat - Epson Stylus Photo RX600 Product Information

Epson Stylus Photo RX600
You see the File Save Settings window:
Type a name for
your file here
Select a file
format here
4. Type a name for your file in the
5. Select a file format in the
6. Click . Epson Scan starts and scans your file to the
OK
location you specified.
Note:
Never open the scanner lid while scanning, or your scans may
not look right.

Scanning From a Program

You can scan from any TWAIN-compliant program—such as
Adobe Photoshop or ArcSoft PhotoImpression—using Epson
Scan. Epson Scan provides three scanning modes for progressive
levels of control over your scanned image:
makes scanning quick and easy, with
Full Auto Mode
automatic image type and resolution settings.
provides a simple screen giving you automatic
Home Mode
image adjustments, previewing and cropping capability, and
preset configurations for various types of scans.
lets you manually configure advanced
Professional Mode
image settings.
See the User's Guide for more information.

Scanning With the Scan Button

1. Place your document face-down on the glass as shown on
page 6, and make sure your computer and RX600 are on.
2. Close the scanner lid.
3. Press the button to set the RX600 to Scan mode.
Scan
4. Use the u and d buttons to choose
the button.
OK
Note:
You can also scan to a memory card or to an e-mail; see the
User's Guide for instructions.
Epson Stylus Photo RX600
12 -
box.
Prefix
box.
Type
, then press
Scan to PC
5. For Windows, if you see the screen below on your
computer, select
EPSON Scan
this program for this action
Select this option
Then check this box
6. When you see the File Save Settings window, type a name
for your file in the
box, and click
Type
7. Complete the scan using Epson Scan.

Placing Film or Slides on the Scanner

You can copy, scan, and print from 35 mm film strips and
slides. Follow the instructions below to:
Remove the film holder and document mat
Load 35 mm film strips in the film holder
Place 35 mm slides on the film holder
Removing the Film Holder and Document
Mat
1. Open the scanner lid and slide out the document mat. Set
the mat aside so you can reinstall it for scanning reflective
documents later.
Note:
You can't scan film or slides unless the white document mat is
removed from the scanner lid.
2/04
and click the
Always use
checkbox. Then click
box, select a file format in the
Prefix
.
OK
.
OK