Power distribution unit
Figure 51
and
power distribution unit and the attached extension bars (power strips).
1
Figure 51
Power distribution unit controls and indicator
Table 15
Power distribution unit controls and indicator
Index
Control/indicator
No.
1
Power LED
2
PDU Switch 1
3
PDU Switch 2
4
Power strip power switch
Powering off the library
1.
Verify that all jobs have completed processing.
2.
Using the OCP, select Operations > Media operations > Unlock Door. The robot is parked.
3.
Open the back doors of the library rack.
4.
Press the main power switch
72
Library operation
Table 15
show and describe the function of the control and indicators located on the
2
1
10
(Figure 48
3
2
10
Function
When lit (red), shows power is applied to the unit.
When not lit, indicates the PDU is not receiving power.
When switched On, applies power to power strip 1.
When switched On, applies power to power strip 2.
When set to I (On), applies power to the power strip. When set to
O (Off), removes power from the power strip.
on page 69) to the O (Off) position.
4
10451