Hp Storageworks Interface Manager Card; Interface Manager Card Reset And Indicators - HP E Series User Manual

HP StorageWorks Interface Manager card

Figure 45 and
controller card.
Figure 45

Interface Manager card reset and indicators

Table 9

Interface Manager card reset and indicators

Index
No. Control/indicators
1
Green link speed LED
2
Green link activity LED
3 Red LED
On
Blinks 1x per 5
second interval
Blinks 2x per 5
second interval
Blinks 3x per 5
second interval
Blinks 4x per 5
second interval
Off
66 Library operation
Table 9 show and describe the control and indicators located on the FC interface
Green LED
Off
Off
Off
Off
Off
Blinks 1x per 5
second interval
1
2
Function
On—Port operating at 100 Mbps.
Off—Port is operating at 10 Mbps, or port is
not connected (see link activity LED).
Off—Port disconnected/no link.
On—Port connected to another Ethernet
device.
Flashing—Data is being transmitted or
received.
BIOS code failed to run.
Hardware POST failed. No firmware images
are loaded.
No CompactFlash disk or valid boot sector
image found.
Specified firmware image files cannot be
found. Neither the current nor the previous
image was found.
Load or execute command failed (boot code
remains at end of process). This indicates
that load, decompress, or execution failed
on both the current and previous image files.
Normal state. Load or execute command
succeeded. Boot code successfully loaded,
decompressed, and initiated one of the
image files.
3
gl01012