Hp Storageworks Command View Tl; Hp Storageworks Library And Tape Tools - HP E Series User Manual

Slot counts are based on the following assumptions:
• Capacity includes reserved slots for cleaning cartridges.
• Reserved slots are located only in the base module on the left side as you open the front door. These
slots are configurable.
• A drive expansion module must be installed below the base module.
• When both the drive and card cage expansion modules are installed, the drive expansion module
must be installed below the base module and above the card cage expansion module.
• The last module in the rack requires an installation of the floor. The floor limits the distance the robot
can travel, which makes the bottom rows in the module inaccessible for tapes.

HP StorageWorks Command View TL

Command View TL provides a browser-based GUI for remote management and monitoring of the
Interface Management card through a LAN. Command View TL is the preferred method for controlling the
Interface Manager card. In conjunction with the Interface Manager card, Command View TL provides the
following:
• Configuration and management of the Interface Manager card and Fibre Channel interface
controllers
• Management of the entire library system
• Hardware inventory and identity information
• Status information for connected hardware
• Error reporting and comprehensive error logs
• Firmware management
• License management
Command View TL is installed on a management station and communicates with the Interface Manager
card through the LAN. The management station processes information from the Interface Manager card
and serves up the Command View TL GUI. You can access Command View TL from the management
station directly, or through any client on the LAN using a browser-based GUI. Multiple Command View TL
clients can be simultaneously open across the LAN, and multiple EML libraries can be managed through
the Command View TL software.
See the Command View TL documentation at
installation, and operating instructions.

HP StorageWorks Library and Tape Tools

HP StorageWorks Library and Tape Tools (L&TT) is a collection of storage hardware management and
diagnostic tools assembled into a single, convenient program. L&TT offers a GUI or command screen
interface (CSI), allowing you to perform the following functions with the EML:
• Installation check—Guides you through a basic installation check of the EML. The software helps you
choose an appropriate host bus adapter, ensuring that the device is detected by the system, and
verifying key device functionality.
• Device identification—Identifies the storage products connected to the system, along with key
information on product configuration and status.
• Troubleshooting tests—Provides various tests to verify product functionality or to isolate product issues.
Tests include device self-tests, read/write tests on drives, exerciser tests for autoloaders and libraries,
and specific device utilities.
http://www.hp.com/support/cvtl
Enterprise Modular Library E-Series user guide
for prerequisites,
29