Library Load Ports On 42U Configuration - HP E Series User Manual

Hide thumbs Also See for E Series:
Table of Contents

Advertisement

The base module has two windows on the front for viewing the robotic motion inside the library. A load
port door is located to the right front (see
tape cartridges for insertion into or removal from the library. The load port can also be used for
additional tape storage. An operator control panel (OCP) is located at the bottom front of the module.
Figure 5

Library load ports on 42U configuration

The base module contains an autoranging power supply (a redundant power supply is optional), card
cage, cable management feature, and space for mounting up to four LTO-technology tape drives on the
back.
The card cage in the base module (see
Library robotics controller (see
and an RS-232 port. One Ethernet port connects this controller to the Interface Manager card.
HP StorageWorks Interface Manager card (see
six Ethernet ports. This board contains 128 MB of dynamic random access memory (DRAM) plus a
256 MB CompactFlash card, both in their own sockets. A 2U-wide adapter panel next to the 4U-wide
Interface Manager card allows it to fit in the lowest 6U-wide card cage slot.
HP StorageWorks e2400-FC 2G interface controller (see
board, having two 2-Gbps FC ports for connecting to the SAN, along with four 2-Gbps FC ports to
connect up to four HP Ultrium tape drives.
An empty card slot reserved for future use.
The cable management feature is a spool, mounted near the tape drives, that allows LAN and FC cables
to be dressed and routed away from hot plug or hot swap components.
Ultrium 460 tape drives (see
bundled with tape media. Ultrium 460 or 960 tape drives are ordered separately with the other 103e
and 245e EML model options.
18
Library overview
Figure
5) where a 5-cartridge magazine can be loaded with
10434
Figure
6) provides four cPCI slots for the following:
Figure
7)—A single slot, 6U-wide cPCI board having Ethernet ports
Figure
Figure
10) come installed in one orderable 103e library model option
8)—A single slot, 4U-wide cPCI board having
Figure
9)—A single slot, 6U-wide cPCI

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ad560–96002

Table of Contents