Who Should Use This Guide; How To Use This Guide - Enterasys Matrix 7G4280-19 Hardware Installation Manual

Who Should Use This Guide

Who Should Use This Guide
This guide is intended for a network administrator responsible for installing and setting
up the DFE module.

How to Use This Guide

This preface provides an overview of this guide and the DFE‐Platinum Series manual set,
and a brief summary of each chapter; defines the conventions used in this document; and
instructs how to obtain technical support from Enterasys Networks. To locate information
about various subjects in this guide, refer to the following table:
For...
An overview of the DFE module
Network requirements that must be met before
installing the DFE module
Instructions to install the DFE module hardware
and Mini-GBICs
Troubleshooting installation problems and
diagnosing network/operational problems using the
LANVIEW LEDs
Specifications, environmental requirements, and
physical properties of the DFE module and Mini-
GBIC interface cards
Instructions to set the mode switches when
necessary and remove and replace the DRAM
SIMM or DIMM memory
xvi About This Guide
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de
instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und
qualifiziertes Personal vorgenommen werden.
Refer to...
Chapter 1, Introduction
Chapter 2, Network Requirements
Chapter 3, Installation
Chapter 4, Troubleshooting
Appendix A, Specifications
Appendix B, Mode Switch Settings and
Installing Options