Panasonic DP-MB251CX Operating Instructions Manual page 94

12. Programmable Features
Feature
Setting the fax to email
destinations
Setting the information
for scan to FTP server
94
Selection
Select email destinations where you want to automatically send received fax
documents to (up to 6 destinations).
Important:
R Program the email server settings (page 96), and the email destinations
(page 98) beforehand.
1. Start Multi-Function Station.
2. [Device] A [Configuration Web Page] A [Device]
3. Type "root" as the user name, then enter the password (feature #155 on
page 72). A [OK]
4. Select [FAX FEATURE] from the menu.
5. Select [ON] from the [FAX AUTO EMAIL] drop-down list.
6. If necessary, select [ON] from [Password PDF] drop-down list and enter a 4-digit
password.
7. Click [Edit] next to [DESTINATION].
8. Click [Address Book] next to the desired destination.
9. Click the name that you want to send the received fax documents to.
10. [Submit]
11. Close the web browser.
Note:
R To check the status of the last 15 transfers, click [List] next to [RESULT] in step
7.
When you send scanned files to an FTP server, you can register the FTP server
destinations (up to 6 destinations) to the unit through the web browser interface.
1. Start Multi-Function Station.
2. [Device] A [Configuration Web Page] A [Device]
3. Type "root" as the user name, then enter the password (feature #155 on
page 72). A [OK]
4. Select [SCAN FEATURE] from the menu.
5. Click [Edit] next to [FTP SERVER].
6. Click [Edit] next to the desired FTP server.
7. Enter the server name, IP address, folder path, etc. A [Submit]
8. Close the web browser.
Note:
R If you do not enter a folder path in step 7, the scanned image will be saved in the
root folder.