Panasonic DP-MB251CX Operating Instructions Manual page 50

7. Copier
Note:
R This feature cannot be used when your original
document size or the recording paper size is set to
A6.
R This feature cannot be used when the duplex feature
(page 46), or ecology mode's duplex (page 101) is
activated.
R You can save the previous page layout setting
(feature #467 on page 83).
7.2.6 N in 1 feature
You can save paper by copying 2, 4 or 8 pages onto 1
page. The documents will be reduced to fit the recording
paper.
1
Set the original (page 35).
2
Press MPAGE LAYOUTN repeatedly to select "PAGE
LAYOUT".
3
Press MCN or MDN repeatedly to select "N in 1".
A MSETN
4
Press MCN or MDN repeatedly to select the number of
original documents from "2 in 1", "4 in 1" or "8
in 1". A MSETN
5
Press MCN or MDN repeatedly to select the layout from
"PORTRAIT" or "LANDSCAPE". A MSETN
6
If necessary, enter the number of copies (up to 99).
7
When using the scanner glass:
1. MxN
R The unit will scan 1 page.
2. Place the next document on the scanner glass
and press MSETN. Repeat this until all the
documents are scanned.
R The unit will start copying.
R You can press MxN anytime to start copying.
When using the automatic document feeder:
MxN
8
After you finish copying, press MwN to reset this
feature.
Original document
"2 in 1"
50
Page layout
"PORTRAIT"
"LANDSCAPE"
Original document
"4 in 1"
"8 in 1"
Note:
R You can save the previous page layout setting
(feature #467 on page 83).
R When the original document size and recording
paper size are different, you can only make a 2 in 1,
or 4 in 1 copied document.
For example, when using the 2 in 1 feature, you can
copy 2 pages of an A5 size original onto an A4 size
recording paper.
Separate N in 1 feature (Scanner glass only)
You can separate an N in 1 copied document back into
its original, separate pages. This feature is available for
documents created using the "2 in 1" and "4 in 1"
settings.
Note:
R This feature cannot be used when your original
document size or the recording paper size is set to
A6.
1. Set the original (page 35).
2. Press MPAGE LAYOUTN repeatedly to select "PAGE
LAYOUT".
3. Press MCN or MDN repeatedly to select "SEPARATE N
in 1". A MSETN
4. Press MCN or MDN repeatedly to select the number of
original documents from "2 in 1" or "4 in 1".
A MSETN
5. Press MCN or MDN repeatedly to select the page layout
of the original document from "PORTRAIT" or
"LANDSCAPE". A MSETN
Page layout
"PORTRAIT"
"LANDSCAPE"
"PORTRAIT"
"LANDSCAPE"