Panasonic DP-MB251CX Operating Instructions Manual page 88

12. Programmable Features
12.1.6 LAN features
Feature
DHCP mode
IP address
Subnet mask
Default gateway
DNS server #1
DNS server #2
Machine name
MAC address
Bonjour
88
Code Selection
#500 When "ENABLED" is selected, the following will be allocated automatically using
a DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
M0N "DISABLED"
M1N "ENABLED" (default)
#501 To set the IP address for the LAN connection. This feature is available when
feature #500 is deactivated.
1. MMENUN A MBNM5NM0NM1N A MSETN
2. Enter the IP address of the unit on the LAN using the dial keypad. A
MSETN A MMENUN
#502 To set the Subnet mask for the LAN connection. This feature is available when
feature #500 is deactivated.
1. MMENUN A MBNM5NM0NM2N A MSETN
2. Enter the subnet mask of the network on the LAN using the dial keypad. A
MSETN A MMENUN
#503 To set the default gateway for the LAN connection. This feature is available when
feature #500 is deactivated.
1. MMENUN A MBNM5NM0NM3N A MSETN
2. Enter the default gateway of the network on the LAN using the dial keypad.
A MSETN A MMENUN
#504 To set the primary DNS server for the LAN connection. This feature is available
when feature #500 is deactivated.
1. MMENUN A MBNM5NM0NM4N A MSETN
2. Enter the primary DNS server of the network on the LAN using the dial keypad.
A MSETN A MMENUN
#505 To set the secondary DNS server for the LAN connection. This feature is available
when feature #500 is deactivated.
1. MMENUN A MBNM5NM0NM5N A MSETN
2. Enter the secondary DNS server of the network on the LAN using the dial
keypad. A MSETN A MMENUN
#507 To set the machine name.
1. MMENUN A MBNM5NM0NM7N A MSETN
2. Enter the name of the unit to recognize on the LAN, up to 15 characters, using
the English alphabet and numbers (see page 53 for character entry).
R The first and last letter must be an English alphabet or numbers.
R Hyphen can also be entered using M1N.
3. MSETN A MMENUN
Note:
R In order to recognize the unit on the LAN, the default name of the unit is
assigned automatically. If you change the name, assign a unique name to
avoid overlapping.
#508 To display the MAC address of the unit.
1. MMENUN A MBNM5NM0NM8N A MSETN
2. The MAC address of the unit will be displayed. A MMENUN
#513 To set the Bonjour feature.
M0N "DISABLED"
M1N "ENABLED" (default)