Table of Contents
Advertisement
■
General settings
● Setting the auto stability and auto hold function
This instrument has auto stability mode and auto hold mode.
• Auto stability mode (displayed as AS)
When the criterion for stability judgment is fulfilled during measurement, the component
icon lights and the measured value is fixed. Once the value deviates from the stability
judgment criterion, the measured value is released and displays instantaneous value.
• Auto hold mode (displayed as AH)
When the criterion for stability judgment is fulfilled during measurement, the component
icon and the HOLD icon light and the measured value is fixed. To release the measured
value, press the
released automatically even when the state deviates from the stability judgment criterion.
• Setting procedure
1. Press the
2. Press the
key.
3. Press the
the
key.
Note
The general setting is common in both CH1 and CH2.
key. Once a measured value is fixed, the measured value is not
key to enter the setting mode.
keys to select "GEN" (general setting) and then press the
keys to select "MEAS" (measurement setting) and then press
key
key
General settings
key
key
79
Advertisement
Table of Contents
