• Setting the TDS method
TDS is calculated from the measured conductivity value. The available calibration
methods are "LINEAR": KCl with factor adjustable from 0.4 to 1.0 (default: 0.5), "442":
Myron L 442 non-linear standard curve, "EN27888": European environmental standard
non-linear curve, and "NACL": non-linear salinity curve.
1. Press the
key to enter the setting mode.
2. Press the
press the
key.
3. Press the
press the
key.
keys to select "TDS" (total dissolved solid setting) and then
keys to select "TDS TYPE" (TDS method setting) and then
key
key
Conductivity measurement
key
key
53