Table of Contents
Advertisement
Measurement setting
● Using the calibration interval alarm (default: OFF)
If calibration has not been performed for set period of time after last calibration is
performed, "ERR No. 0008" is displayed to prevent forgetting to perform calibration.
When the error is displayed, performing calibration clears the error.
1. Press the
main screen.
2. Press the
3. Press the
press the
4. Enter the setting period of the calibration interval alarm and then press the
key.
The setting range is 1 day to 400 days.
To return to the measurement mode, press the
74
key to enter the setting mode when "pH" icon is shown on the
keys to select "pH" (pH setting) and then press the
key to select "CAL ALR" (calibration alarm setting) and then
key.
Enter a
number
key
key
key
key.
key.
key
key
Advertisement
Table of Contents
