Transferring Saved Data To A Pc - YaliTech LAQUAact-PC110 Instruction Manual

● Transferring saved data to a PC
By using a serial cable to connect the instrument to a PC, you can transfer the saved
data to the PC and edit it. Connect the RS-232C connector at the instrument side to the
serial port on the PC.
To save and edit data, please download the software "FD-70" from our website after the
registration. (The software "FD-70" will be available at the end of February 2016.)
For details of how to use the "FD-70", refer to the "FD-70" instruction manual, which you
can download from our website as well.
The required PC specifications and recommended PC specifications for using the "FD-
70" are shown in the following table.
Item Required PC specifications
Memory
CPU
HDD free space
OS
Display
Connector
Note
・ If you are not using the RS-232C communication, close the connector cover tightly.
・ While using the RS-232C communication, the instrument is not dust-proof or waterproof.
Do not use the RS-232C communication in a dusty place or with wet hands.
32 bit: 1 GB or more
64 bit: 2 GB or more
1 GHz or more
5 GB or more
Windows 7, Windows 8 (8.1), or Windows 10
Super VGA (800 × 600) or more
Serial connector (D-Sub 9 pin)
Recommended PC specifications
10 GB or more
Other settings
93