Table of Contents
Advertisement
Names of each part
● Operation key
Key
Name
MEAS key
CAL key
DATA key
SET key
POWER key
MODE key
LIGHT key
ENTER key
UP key
DOWN key
LEFT key
RIGHT key
6
Changes the operation mode to the measurement mode
during operation in a different mode.
Releases the fixed measurement value mode in the auto
hold mode.
Changes from the measurement mode to the calibration
mode.
Start calibration in the calibration mode.
Changes from the measurement mode to the data mode.
Changes from the measurement mode to the setting mode.
Starts repeatability inspection after calibration is complete.
Turns ON/OFF the power of instrument.
In the measurement mode, changes measurement
parameters.
Turns on/off the backlight.
Determines the selection or setting.
Prints data in measurement, the calibration and data mode.
In the measurement mode, switches the display between
the main screen and the sub screen.
Changes the selected item.
Changes the number of the selected digit when entering
numbers.
Changes the selected item.
Changes the selected digit when entering numbers.
Function
Advertisement
Table of Contents
