Table of Contents
Advertisement
Basic operation
● Saving measurement data in the internal memory
Up to 1000 data items measured by the instrument can be stored in the internal memory.
Saving the measurement data is possible only when the instrument is in the
measurement mode.
1. Press the
The saved data is displayed for two seconds and then the display returns to the
previous screen automatically.
Note
If the data saved reaches 1000 data items, an error occurs and "ERR No. 0010" is
displayed. Copy or transfer necessary data to a PC and delete the data from the memory
("Deleting all saved data" (page 68)).
16
key while the data to save is displayed.
key
Advertisement
Table of Contents
