Table of Contents
Advertisement
Conductivity measurement
• Setting the temperature conversion (Default: ON, 2.00%/°C）
The measured value of a sample that is not at 25°C can be converted to a value at the
selected temperature. To use the temperature conversion function correctly, temperature
coefficient (the rate of change per 1°C of the conductivity) must be set for each sample.
The setting of "Setting the temperature display" (page 41) is applied to the sample
temperature before the conversion.
1. Press the
2. Press the
the
key.
3. Press the
then press the
key
4. Press the
key to confirm.
Enter a
number
To return to the measurement mode, press the
50
key to enter the setting mode.
keys to select "COND" (conductivity setting) and then press
keys to select "TEMP CF" (temperature conversion setting) and
key.
key
keys to enter the temperature coefficient and then press the
key
key
key
key.
Advertisement
Table of Contents
