Restore Factory Defaults (Settings > Factory Reset): Restores all network and Designer settings to the factory defaults.
This is the same as performing a full factory reset using the reset button on the device.
Default Settings (Presets > Restore default settings): Restores audio settings back to factory settings (excluding de
vice name, IP settings, and passwords).
MXA310 Control Software
There are 2 ways to control the MXA310:
•
Option 1:
Use Shure Designer software
◦
Control all Shure devices in one place
◦
Route audio to and from Shure devices
•
Option 2: Access the MXA310's web application with
◦
Control 1 microphone at a time
◦
Route audio with
Dante Controller software
Control Devices with Shure Designer Software
To control this device's settings, use Shure Designer software. Designer enables integrators and system planners to design au
dio coverage for installations using MXA microphones and other Shure networked devices.
To access your device in Designer:
1.
Download and install Designer on a computer connected to the same network as your device.
2.
Open Designer, and check that you're connected to the correct network in File > Designer preferences.
3.
Click Online devices. A list of online devices appears.
4.
To identify devices, select a device and click ID in the Properties menu. Double-click the device to open the settings.
From here, you can add devices to designs or online rooms and route audio to other Shure devices. Learn more at
designer.
You can also access device settings using
Accessing the Web Application without the Discovery App
If the Discovery application is not installed, the web application can be accessed by typing the DNS name into an internet
browser. The DNS name is derived from model of the unit, in combination with the last three bytes (six digits) of the MAC ad
dress, and ending in .local.
Format Example: If the MAC address of a unit is 00:0E:DD:AA:BB:CC, then the link is written as follows:
MXA310:
http://MXA310-aabbcc.local
Microphone Placement
Each microphone has 4 channels that can be aimed independently, based on the seating arrangement. Each channel features
independent polar patterns and additional channel settings. You can control these settings in Shure Designer software or in the
device's web application.
Designer software provides increased positioning flexibility over traditional conferencing microphones:
•
Configurable pickup areas can be rotated and modified for the number of talkers.
•
Network connectivity, device identification, and presets allow moving, adding and removing microphones with ease.
Shure Web Device Discovery
Shure Web Device
Discovery.
Shure Incorporated
shure.com/
10/42