Glideslope Mode (Gs) - Garmin G1000 Reference Manual

Integrated flight deck for cessna nav iii
Hide thumbs Also See for G1000:
Table of Contents

Advertisement

Figure 6-16 Glidepath Mode Armed
If vertical guidance becomes or is expected to become
unavailable and the approach downgrades, Glidepath
Mode is disarmed. When vertical guidance becomes
available again, Glidepath Mode is automatically re-armed
under GPS Approach Mode.

Glideslope Mode (GS)

NOTE: Pressing the CWS Button while Glideslope
Mode is active does not cancel the mode. The
autopilot guides the aircraft back to the glides-
lope upon release of the CWS Button.
Active ILS
Frequency
Tuned
Command Bars
Indicate Descent on
Localizer/Glides-
lope Path
HSI Set to LOC2
Approach Mode Active
Figure 6-17 Glideslope Mode
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
Glideslope Mode is available for LOC/ILS approaches
to capture and track the glideslope. Glideslope Mode is
armed when:
• A valid localizer frequency is tuned
• LOC Approach Mode is armed (the APR Key is
pressed and either LOC is the selected navigation
source or a LOC/ILS approach is loaded into the
flight plan; see LOC Approach Mode)
Figure 6-18 Glideslope Mode Armed
Once the localizer has been set as the navigation
source, the localizer and glideslope can be captured. Upon
reaching the glideslope, the flight director transitions to
Glideslope Mode and begins to intercept and track the
glideslope.
Glideslope Mode Active
SECTION 6 – AUTOMATIC
FLIGHT CONTROL
Glideslope
Indicator
6-15

Advertisement

Table of Contents
loading

Table of Contents