Section 7: Navigation; Navigation Map Page; Select The Map Page Group; Direct-To Navigation - Garmin G1000 Reference Manual

SECTION 7: NAVIGATION

The majority of the following discussions pertain to
the Multi Function Display. In discussions pertaining to
the PFD, the controls are located on the PFD.
7.1

NAVIGATION MAP PAGE

WARNING: The map display should only be
used for situational awareness. Any map display
indication should be compared with approved
navigation sources.

Select the MAP Page Group

1) Turn the large FMS Knob until 'MAP' is highlighted
in the page group box in the lower right of the
MFD display.
2) Turn the small FMS Knob to select the first MAP
page (indicated by a solid rectangular icon).
Figure 7-1 Navigation Map Page (Enroute)
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
7.2

DIRECT-TO NAVIGATION

Direct-to Navigation from the MFD

Identifier
Facility Name
City
VNAV
Target Altitude
Map of the
Selected
Waypoint
Bearing
Direct-to
Course
Figure 7-2 MFD Direct-to Window

Enter a Direct-to Destination

1) Press the Direct-to (
2) Enter the destination waypoint identifier.
3) Press the ENT Key to confirm the identifier. The
'Activate?' field is highlighted.
4) If no altitude constraint or course is desired, press
the ENT Key to activate. To enter an altitude
constraint, proceed to step 5.
5) Turn the large FMS Knob to place the cursor over
the 'VNAV' altitude field.
6) Enter the desired altitude.
7) Press the ENT Key. The option to select 'MSL' or
'AGL' is now displayed.
8) Turn the small FMS Knob to select 'MSL' or
'AGL'.
SECTION 7 – NAVIGATION
Geographic
Region
VNAV Target Altitude
Offset Before Selected
Direct-to
Map Orientation
Map Range
Distance
Activate Field
) Key.
7-1