Activate An Approach In The Active Flight Plan - Garmin G1000 Reference Manual

6) Turn either FMS Knob to highlight the desired
approach. Press the ENT Key.
7) The cursor will move to the TRANSITIONS field.
Turn the large FMS Knob to highlight the desired
transition waypoint and press the ENT Key. (The
"Vectors" option assumes vectors will be received
to the final course segment of the approach and
will provide navigation guidance relative to the
final approach course.)
Figure 9-7 Selecting an Approach Transition
8) Turn the large FMS Knob to highlight 'Activate?'
and press the ENT Key to activate the approach.
Selecting 'Load?' will add the procedure to the
flight plan without immediately using it for
navigation guidance.
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
SECTION 9 – PROCEDURES

Activate An Approach in the Active Flight Plan

1) With the Navigation Map Page displayed, press
the PROC Key.
2) Turn the large FMS Knob to highlight 'ACTIVATE
APPROACH'.
3) Press the ENT Key. The approach procedure is
now active.
9-3