Load A Departure; Load An Arrival; 8.10 Load An Approach; Remove A Departure, Arrival, Or Approach From A Flight Plan - Garmin G1000 Reference Manual

8.8

LOAD A DEPARTURE

See the Procedures section for a discussion on loading
and activating departure procedures.
8.9

LOAD AN ARRIVAL

See the Procedures section for a discussion on loading
and activating arrival procedures.

8.10 LOAD AN APPROACH

See the Procedures section for a discussion on loading
and activating approach procedures.
8.11 REMOVE A DEPARTURE, ARRIVAL,
OR APPROACH FROM A FLIGHT PLAN
1) With the Active or Stored Flight Plan Page
displayed, press the FMS Knob to activate the
cursor.
2) Turn the large FMS Knob to highlight the title
for the approach, departure or arrival to be
deleted. Titles appear in white directly above
the procedure's waypoints.
3) Press the CLR Key to display a confirmation
window. With 'OK' highlighted, press the ENT
Key to remove the selected procedure.

8.12 STORE A FLIGHT PLAN

1) After creating a flight plan on either the PFD
or MFD, it may be saved by pressing the MENU
Key.
2) Turn the large FMS Knob to highlight 'Store Flight
Plan' and press the ENT Key.
3) With 'OK' highlighted, press the ENT Key to store
the flight plan.
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
SECTION 8 – FLIGHT PLANNING
Figure 8-13 Store Flight Plan Confirmation

8.13 EDIT A STORED FLIGHT PLAN

1) Press the FPL Key and turn the small FMS Knob
to display the Flight Plan Catalog Page.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired
flight plan and press the ENT Key.
4) Turn the large FMS Knob to place the cursor in
the desired locations for entering changes.
5) Turn the FMS Knobs to make the desired changes,
then press the ENT Key.
6) Press the FMS Knob to return to the Flight Plan
Catalog Page.
8.14 DELETE A WAYPOINT FROM THE
FLIGHT PLAN
1) With either the Active or Stored Flight Plan
displayed, press the FMS Knob to activate the
cursor.
2) Turn the large FMS Knob to select the waypoint
to be deleted.
3) Press the CLR Key to display a 'REMOVE (Wpt
Name)' confirmation window.
Figure 8-14 Remove Waypoint Confirmation
8-5