Dante Controller; Downloading And Installing Dante Controller; Configuring The Axi In Dante Controller - Extron electronics AXI 22 AT User Manual

Dante Controller

This section discusses Dante Controller, the software used to configure a Dante network
and route audio between Dante-enabled devices on the same network. The following topics
are discussed:
•
•
•
•

Downloading and Installing Dante Controller

Dante Controller from Audinate is required to select and route digital inputs and outputs
to connected Dante-enabled devices and for limited configuration of the device. Install
Dante Controller on a PC running Microsoft
computer requirements, see the Dante Controller product page on the Extron website.
Dante Controller is available at www.extron.com.
To download Dante Controller:
1.
2.
3.
4.
5.
6.

Configuring the AXI in Dante Controller

Use a standard Ethernet cable to connect the AXI 22 AT or AXI 44 AT to a network via the
rear panel AT (PoE) port (see
the Dante Controller program.
Dante Controller auto-discovers all Dante devices on the network and advertises itself to
allow communication over the network.
Downloading and Installing Dante Controller
Configuring the AXI in Dante Controller
Physical Dante Network Setup
Dante Controller Operation
From www.extron.com, click the Download tab, the Download page opens.
Click the Software button on the Download page.
From the Software page, click Dante Controller to open the Dante Controller
product page.
On the Dante Controller page, click Download. The Download Center page
opens.
On the Download Center page, click the Download dantecontroller.exe button
and follow the prompts to download or run the Dante Controller installer file. If you
choose to save the file for later installation, note the location.
If you choose to run the file, follow all prompts. If you saved the file, double-click the
saved file to begin installation when ready.
D
Windows 7 or newer. For full details about
® ®
in figure 3 on page 5) and power the device. Launch
AXI 22 AT and AXI 44 AT • Dante Controller 19