Dante Controller
This section discusses Dante Controller, the software used to configure a Dante network
and route audio between Dante-enabled devices on the same network. The following topics
are discussed:
•
•
•
•
Downloading and Installing Dante Controller
Dante Controller from Audinate is required to select and route digital inputs and outputs to
connected Dante-enabled devices and for limited configuration of the device. Install Dante
Controller on a PC running Microsoft
requirements, see the Dante Controller product page on the Extron website. Dante
Controller is available at
To download Dante Controller:
1.
2.
Downloading and Installing Dante Controller
Configuring the AXI in Dante Controller
Physical Dante Network Setup
Dante Controller Operation
www.extron.com
From
, click the
www.extron.com
On the left sidebar, click the
figure 21
page opens (see
Figure 20.
Accessing the Dante Controller Download Page
Windows
7 or newer. For full details about computer
®
®
.
tab (see figure 20,
Download
link (
2
Dante Controller
on the next page).
AXI 22 AT and AXI 44 AT • Dante Controller
).
1
). The
Dante Controller
20