3Com 2924-SFP User Manual page 94

94 C 7: A
HAPTER GGREGATING
P
ORTS
1 Click Ports > Link Aggregation > Create. The Link Aggregation Create
Page opens:
Figure 47 Link Aggregation Create Page
The Link Aggregation Create Page includes the following fields:
Enter aggregation Group ID — Displays the group ID. The range is
■
1-8 groups.
Static — Selects the link aggregation type to be static.
■
LACP — Selects the link aggregation type to be LACP.
■
Select ports for the new aggregation — Displays the ports for
■
which the link aggregation parameters are defined.
Blue — Displays a member of the aggregation being created.
■
White — Displays a non existent member of any aggregation.
■
Grey — Displays a member of an existing aggregation or VLAN.
■
Summary
Group ID — Displays the Link Aggregated Group ID.
■
Member Ports — Displays the ports configured to the LAG.
■
2 Define the fields.
3 Click Apply. The LAG configuration is defined, and the device is updated.