Upgrade The Firmware Image - 3Com 2924-SFP User Manual

Upgrade the
Firmware Image
The Restore Image Page permits network managers to upgrade the
switch firmware.
Note: The bootcode can only be upgraded using the Command Line
■
Interface (CLI). See "Upgrading Software using the CLI" page 27.
The monitor user has no access to this page.
■
To download the software image:
1 Click Administration > Firmware Upgrade > Restore Image. The
Restore Image Page opens:
Figure 93 Restore Image Page
The Restore Image Page contains the following fields:
Download via TFTP — Enables initiating a download via the TFTP
■
server.
Download via HTTP — Enables initiating a download via the HTTP
■
server or HTTPS server.
TFTP Server IP Address — Specifies the TFTP Server IP Address from
■
which the image files are downloaded.
Source File Name — Specifies the image files to be downloaded.
■
2 Define the relevant fields.
3 Click Apply. The files are downloaded, and the device is updated.

Upgrade the Firmware Image

165