3Com 2924-SFP User Manual page 176

176 C 17: M
HAPTER ANAGING
Defining Port
Mirroring
D D
EVICE IAGNOSTICS
The Port Mirroring Setup Page contains parameters for configuring port
mirroring.
To enable port mirroring:
1 Click Monitoring > Port Mirroring > Setup. The Port Mirroring Setup
Page opens:
Figure 98 Port Mirroring Setup Page
The Port Mirroring Setup Page contains the following fields:
Select Port Type — Defines the port that will be the monitor port
■
(destination port) and the port that will be mirrored (source port). The
possible values are:
Monitor — Defines the port as the monitor port, the destination
■
port.
Mirror — Defines the port as the mirrored port to be monitored
■
and indicates the traffic direction to be monitored. If selected, the
possible values are:
Mirror In — Enables port mirroring on the port RX.
■
Mirror Out — Enables port mirroring on the port TX.
■