3Com 2924-SFP User Manual page 154

154 C 13: C
HAPTER ONFIGURING
Viewing Voice VLANs
Q S
UALITY OF ERVICE
The Voice VLAN Summary Page contains information about the Voice
VLAN currently enabled on the device, including the ports enabled and
included in the Voice VLAN.
To view Voice VLAN Settings:
1 Click Device > QoS > VoIP > Traffic Setting > Summary. The Voice
VLAN Summary Page opens:
Figure 85 Voice VLAN Summary Page
The Voice VLAN Summary Page contains the following fields:
Voice VLAN State — Indicates if Voice VLAN is enabled on the
■
device. The possible field values are:
Enable — Enables Voice VLAN on the device.
■
Disable — Disables Voice VLAN on the device. This is the default
■
value.
Voice VLAN ID — Defines the Voice VLAN ID number.
■
Voice VLAN Aging Time — Indicates the amount of time after the
■
last IP phone's OUI is aged out for a specific port. The port will age out
after the bridge and voice aging time. The default time is one day. The
field format is Day, Hour, Minute. The aging time starts after the MAC
Address is aged out from the Dynamic MAC Address table. The
default time is 300 sec. For more information on defining MAC
address age out time, see Defining Aging Time.
Ports Enabled for Voice VLAN — Displays the ports on which Voice
■
VLAN is enabled.