3Com 2924-SFP User Manual page 134

134 C 11: C
HAPTER ONFIGURING
S T
PANNING REE
Enabled — Indicates fast link is enabled on the port.
■
Auto — Enables the device to automatically establish a fast link.
■
Disabled — Indicates fast link is disabled on the port.
■
Root Guard — Restricts the interface from acting as the root port of
■
the switch. The possible field values are:
Enable — Indicates Root Guard is enabled on the port
■
Disable — Indicates Root Guard is disabled on the port.
■
Default Path Cost — Indicates if Default Path Cost is enabled. The
■
possible field values are:
Enable — Enables the default path cost on the port.
■
Disable — Disables the default path cost on the port.
■
Path Cost — Indicates the port contribution to the root path cost. The
■
path cost is adjusted to a higher or lower value, and is used to forward
traffic when a path is re-routed. The field range is 1-200,000,000
Priority — Priority value of the port. The priority value influences the
■
port choice when a bridge has two ports connected in a loop. The
priority value is between 0 -240. The priority value is determined in
increments of 16.
RSTP Link Type — Indicates whether a Point-to-Point link is
■
established, or if the device is permitted to establish a Point-to-Point
link. The possible field values are:
Auto nables the device to establish automatically Point-to-Point
—
E
■
link.
Point to Point
■
established on the port. Ports set to Full Duplex modes are
considered Point-to-Point port links.
Shared — Enables the device to establish a shared link.
■
Select Port(s) — Indicates the ports to be defined.
■
2 Select the ports to be defined
3 Define the fields.
4 Click Apply. Spanning Tree is modified on the port, and the device is
updated.
Indicates if a Point-to-Point link is currently
—
.