Configuring MAC
Based ACLs
1 Click Device > ACL > MAC Based ACL > Setup. The MAC Based ACL
Ethertype — Provides an identifier that differentiates between
■
various types of protocols.
Action — Indicates the ACL forwarding action. In addition, the port
■
can be shut down, a trap can be sent to the network administrator, or
packet is assigned rate limiting restrictions for forwarding. The options
are as follows:
Permit — Forwards packets which meet the ACL criteria.
■
Deny — Drops packets which meet the ACL criteria.
■
Shutdown — Drops packet that meets the ACL criteria, and
■
disables the port to which the packet was addressed. Ports are
reactivated from the Port Administration Setup Page.
The MAC Based ACL Setup Page allows the network administrator to
select, create and define rules for MAC-based Access Control Lists.
Monitor users have no access to this page.
Setup Page opens:
Figure 29
MAC Based ACL Setup Page
The MAC Based ACL Setup Page contains the following fields:
Selection ACL — Lists previously defined Access Control Lists.
■
Create ACL — Create a new user-defined MAC based ACL.
■
Defining Access Control Lists
59