Removing Address
Tables
Aging Time — Specifies the amount of time the MAC Address
■
remains in the Dynamic MAC Address before it is timed out if no
traffic from the source is detected. The default value is 300 seconds.
2 Select the port(s) to remove.
3 Click Remove. The selected ports are removed from the MAC address
table, and the device is updated.
The Address Table Remove Page allows the network manager to remove
current MAC addresses from the Address Table.
The monitor users have no access to this page.
To remove Address Tables:
1 Click Monitoring > Address Table > Remove. The Address Table
Remove Page opens:
Figure 67 Address Table Remove Page
The Address Table Remove Page contains the following fields:
MAC Address — Displays the current MAC addresses listed in the
■
MAC address table.
VLAN ID — Displays the VLAN ID attached to the MAC Address.
■
State — Displays the MAC address configuration method. Possible
■
values are:
Configuring Address Tables
121