Defining Arp Settings - 3Com 2924-SFP User Manual

112 C 9: C
HAPTER ONFIGURING

Defining ARP Settings

IP MAC A
AND DDRESS
The ARP Settings Setup Page allows network managers to define ARP
parameters for specific interfaces.
The monitor users have no access to this page.
To configure ARP entries:
1 Click Administration > ARP Settings > Setup. The ARP Settings Setup
Page opens:
Figure 60 ARP Settings Setup Page
The ARP Settings Setup Page contains the following fields:
VLAN — Indicates the VLAN for which ARP parameters are defined.
■
IP Address — Indicates the station IP address, which is associated
■
with the MAC address.
MAC Address — Displays the station MAC address, which is
■
associated in the ARP table with the IP address.
ARP Entry Age Out — Specifies the amount of time (in seconds) that
■
passes between ARP Table entry requests. Following the ARP Entry
Age period, the entry is deleted from the table. The range is 1 -
40000000. The default value is 300 seconds.
2 Define the fields.
3 Click Apply. The ARP parameters are defined, and the device is updated.
I
NFORMATION