Configuring System Time - 3Com 2924-SFP User Manual

Configuring System
Time
The System Time Setup Page contains fields for defining system time
parameters for the local hardware clock. Daylight Savings Time can be
enabled on the device.
Monitor users have limited permissions on this page.
Country specific times need to be added manually.
To configure the System Time:
1 Click Administration > System Time. The System Time Setup Page
opens:
Figure 42 System Time Setup Page
The System Time Setup Page contains the following sections:
Local Settings — Displays the system time in the following format:
■
Time — Indicates the system time. You can configure the Hours (in
■
24-hour format), Minutes, and Seconds.
Date — Displays the month of the year. You can configure the
■
Month, Day, and Year.
Daylight Saving — This check box enables and disables automatic
■
Daylight Saving Time (DST) on the switch. When checked, the DST
setup parameters are displayed.

Configuring System Time

83