3Com 2924-SFP User Manual page 87

10M — Indicates the port is currently operating at 10 Mbps.
■
100M — Indicates the port is currently operating at 100 Mbps.
■
1000M — Indicates the port is currently operating at 1000 Mbps.
■
Duplex Mode — Displays the port duplex mode. This field is
■
configurable only when auto negotiation is disabled, and the port
speed is set to 10M or 100M or 1000M per second. This field cannot
be configured on LAGs. The possible field values are:
Full — The interface supports transmission between the device and
■
its link partner in both directions simultaneously.
Half — The interface supports transmission between the device
■
and the client in only one direction at a time.
Flow Control — Displays the flow control status on the port.
■
Operates when the port is in full duplex mode. The possible field
values are:
Enable — Enables flow control on the port.
■
Disable — Disables flow control on the port.
■
Viewing Port Settings 87