Advertisement
Arming with the Power Lock Switch
Your alarm system will arm when
you
use either power
lock switch to lock the doors while any door is open and
the key is removed from the ignition (if you would like
to turn off the power door lock switch arming, see
"Locks and Lighting Choices" in the Index). The
security light flashes quickly to let you know when the
system is ready to arm with the power door switches.
The security light will stop flashing and stay on, when
you press the rear of the power lock switch, to let you
know the system is arming. After all doors are closed
and locked,
the
security light will begin flashing at a
very slow rate to let you know the system is armed.
Arming with the
Key
Chain Transmitter
Your alarm system will arm when you use your key
chain
transmitter to lock the doors while the key is removed
from the ignition. The security light will turn on to let you
know the system is arming. After all doors are closed and
locked, the security light will begin flashing
at a
very slow
rate to
let you know
the
system
is
armed.
Arming Confirmation
If remote unlock confirmation is
on (see "Locks and Lighting
Choices" in the Index), your headlamps will flash briefly
to
let you know when your alarm system has armed.
Disarming with the Key. Chain Transmitter
Your alarm
system will disarm when you
use
your
key
chain transmitter
to
unlock the doors.
The security
light
will stop flashing to let you know the system is disarmed.
Disarming with Your Key
Your alarm system will disarm when you use your key
to unlock the doors. The security light will stop flashing
to let
you know
the system is disarmed. If you would
like your key to disarm the alarm system, see "Locks
and Lighting Choices" in the Index.
Nuisance Alarms
If you experience nuisance alarms (alarms which are not
caused by the opening of a door and are not desirable),
you
may need
to
reduce the damage detection sensitivity.
Try programming your Content Theft-Deterrent to mode
1, see "Locks and Lighting Choices" in the Index. If you
continue to experience nuisance alarms, you may want to
t r y
turning off damage detection by programming your
Content Theft-Deterrent to mode 2, see "Locks and
Lighting Choices" in the Index.
If you are still having trouble with nuisance alarms, you
can turn off
the Content Theft-Deterrent system by
programming your Content Theft-Deterrent to mode 3,
see "Locks and Lighting Choices" in the Index. See your
dealer
or a qualified technician
for service.
2-14
Advertisement
