Advertisement
CAUTION: (Continued)
emergency, you can use a cloth or a paper towel
to do this; but be sure to use
a
scraper or wire
brush later, if you need to, to get all the rust or
dirt off.
I
Never use oil or
grease on
studs
or nuts.
If
you
do, the nuts might come loose. Your wheel could
fall off, causing a serious accident.
5. Replace the wheel nuts
with the rounded end
of the nuts toward the
wheel. Tighten each nut
by hand until the wheel
is held against the hub.
6. Lower the vehicle by turning the jack handle
counterclockwise. Lower the jack completely.
Advertisement
