Advertisement
[ON:
You can be burned if
you spill coolant on hot
engine parts. Coolant contains ethylene glycol
and it will burn if the engine parts are hot
enough. Don't spill coolant on a hot engine.
3. After the engine cools, open the coolant air bleed valve.
3.1L V6 (VIN Code M): There are two bleed valves.
One is located on the thermostat housing. The other
is located on the thermostat bypass tube.
3800 V6 (VIN Code
K)
&
3800 V6' supercharged
engine (VIN Code 1): There is one bleed valve.
It is located on the thermostat housing.
4. Fill the with the proper mix, up to the base of the
filler neck.
If you see a stream of coolant coming from an air
bleed valve, close the valve. Otherwise, close the
valves after the radiator is filled.
5.
Rinse or wipe any spilled coolant from the engine
and the compartment.
5-21
Advertisement
