Advertisement
If any error occurs repeatedly or if an error can't be
corrected, please contact your dealer. If your radio
displays an error number, write it down and provide it to
your dealer when reporting the problem.
PREV (1):
Press this button or the
SEEK
down arrow to
search for the previous selection on the tape, Your tape
must have at least three seconds of
silence
between each
selection for PREV or SEEK to work. The tape direction
arrow blinks during PREV or SEEK operation. Press
PREV or the SEEK down assow to stop searching. The
sound will mute during
PREV
or SEEK operation.
NEXT
(2):
Press this button
or
the SEEK up arrow to
search for the next selection on the tape. If you hold the
button, the player will continue moving forward through
the tape. Your tape must have at least three seconds of
silence between each selection for NEXT or SEEK to
work. The tape direction arrow blinks during NEXT or
SEEK operation. Press NEXT or the SEEK up arrow to
stop searching. The sound will mute during NEXT or
SEEK operation.
PROG ( 3 ) : Press this button to play the other side of
the tape.
flu
(4): Press this button to reduce background
noise. Note that the double-6) symbol will appear on
the display.
Dolby* Noise Reduction is' manufactured under a
license from Dolby Laboratories Licensing Corporation.
Dolby and the double-D symbol are tradernarks
of
Dolby Laboratories Licensing Corporation.
REV
(5): Press this button to reverse the tape rapidly.
Press it again to return to playing speed. The radio will
play the last-selected station while the tape reverses.
You may select stations during REV operation by using
SEEK or TUNE,
FWD (6): Press this button to advance quickly to
another part of the tape. Press the button again to return
to
playing speed.
The
radio will play
the
last-selected
station while the tape advances.
You
may select stations
during FWD operation by using SEEK or TUNE.
AM-FM: Press this button to play the radio when a tape
is in the player.
TAPEFLAY: Press this button to change to the tape
function when the radio is on. The tape symbol with an
arrow will appear on the display when the tape is active.
To return to playing the radio, press the AM-FM button.
E JECE Press this button to remove the tape. The radio
will play. EJECT may be activated with either the
ignition or radio off. Cassettes may be loaded with the
radio and ignition off if this button is pressed first.
3-14
Advertisement
