Advertisement
To adjust the HUD so you can see it properly:
1. Start your engine and turn the DIM dial to the
desired HUD image brightness.
2. Adjust your seat, if necessary, to a Comfortable position.
3. Press the top of the UPDN switch until the HUD image
stops moving. Then press the bottom
of the switch until
~e image is as low as possible but in full view.
brighter than necessary. To turn the HUD off, turn
the DIM dial all the way down.
4. Turn
the DIM
dial
down until the HUD
image
is
no
If the sun comes out, it becomes cloudy, or if you turn
on your headlamps, you may need to adjust the HUD
brightness again. Polarizing sunglasses could make the
HUD image harder to see.
If the HUD image is too bright, or too high in
your field of view, it may take you more time to
see things you need to see when it's dark outside.
Be sure to keep the HUD image dim and placed
low in your field of view.
Push the ENG/MET button
on the trip calculator to
switch the HUD speed
display from English to
metric or metric to English.
If you don't have the trip
calculator, you can't change
the display.
2-85
Advertisement
