Advertisement
REV (5): Press this button to reverse the tape rapidly.
Press it again to return to playing speed. The radio will
play the last-selected station while the tape reverses.
You may select stations during REV operation by using
SEEK or TUNE.
FWD (6): Press this button to advance quickly to
another part of the tape. Press the button again to return
to playing speed. The radio will play the last-selected
station while the tape advances. You may select stations
during
FWD
operation by using SEEM
or
TUNE.
AMmFM:
Press this button to play tne radio when
a
tape
is in the player.
TAPERLAPI': Press this button
to
change to the tape
function when the radio is on. The tape symbol with an
m o w will appear on the display when the tape is active.
To return to playing the radio, press the AM-FM button.
EJECT: Press this button to remove the tape. The radio
will play. EJECT may be activated with either the
ignition or radio off. Cassettes may be loaded with
the
radio off if this button is pressed first.
CLN: If
this message appears
on the
display,
the
cassette tape player needs to be cleaned. It will still play
tapes, but you should clean it as
soon as
possible to
prevent damage to the tapes and player. See "Care of
Your Cassette Tape Player" in the Index. After you clean
the player, press and hold EJECT for five seconds to
reset the CLN indicator. The radio will display
---
to
show the indicator was reset.
CD Adapter Kits
It is possible to use a CD adapter kit with your cassette
tape player after activating the bypass feature on your
tape player.
To activate the bypass feature, the ignition must be on,
Turn your radio off. Press TAPEFLAY and hold for
three seconds. After three seconds, the tape symbol in
the display will flash for two seconds indicating
the
feature is active. Turn the radio on and insert
the adapter.
This override feature will remain active until EJECT
is
pressed.
3-18
Advertisement
