Pairing A Phone - Chevrolet 2010 Impala Owner's Manual

Hide thumbs Also See for 2010 Impala:
Table of Contents

Advertisement

Pairing
A Bluetooth enabled cell phone must be paired to the
in-vehicle Bluetooth system first and then connected to
the vehicle before it can be used. See the cell phone
manufacturers user guide for Bluetooth functions before
pairing the cell phone. If a Bluetooth phone is not
connected, calls will be made using OnStar
Calling, if available. Refer to the OnStar owner's guide for
more information.
Pairing Information:
Up to five cell phones can be paired to the in-vehicle
Bluetooth system.
The pairing process is disabled when the vehicle is
moving.
The in-vehicle Bluetooth system automatically links
with the first available paired cell phone in the
order the phone was paired.
Only one paired cell phone can be connected to the
in-vehicle Bluetooth system at a time.
Pairing should only need to be completed once,
unless changes to the pairing information have
been made or the phone is deleted.
To link to a different paired phone, see Linking to a
Different Phone later in this section.

Pairing a Phone

1. Press and hold
responds with "Ready" followed by a tone.
2. Say "Bluetooth". The system responds with
"Bluetooth ready" followed by a tone.
®
3. Say "Pair". The system responds with instructions
Hands-Free
and a four digit PIN number. The PIN number will
be used in Step 4.
4. Start the Pairing process on the cell phone that will
be paired to the vehicle. Reference the cell phone
manufacturers user guide for information on
this process.
Locate the device named "General Motors" in the list
on the cellular phone and follow the instructions on
the cell phone to enter the four digit PIN number that
was provided in Step 3.
5. The system prompts for a name for the phone.
Use a name that best describes the phone.
This name will be used to indicate which phone is
connected. The system then confirms the name
provided.
6. The system responds with "<Phone name> has
been successfully paired" after the pairing process
is complete.
7. Repeat Steps 1 through 7 for additional phones to
be paired.
b g
for two seconds. The system
4-75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents